TAOT Gibson Les Paul Wiring Kit - Short Shaft - Orange Drop Caps

The Art Of Tone

Wiring Kit - Gibson Les Paul® - Short Shaft - CTS TAOT 500K Pots - Orange Drop Caps

×
×
Price:
$39.99
Weight:
8.00 Ounces
Availability:
Usually ships within 24 hours
Shipping:
Calculated at checkout
Quantity:
  • Product Description

    The wiring kit gives you all the compenents, including our CTS 450S custom series 5% tolerance pots, that you need to improve the tone of your favorite Les Paul in a kit priced to be easy on your budget .

    What's included: 

    • Four (4) TAOT CTS 450S Custom Series 500K Audio Pots, short/split, knurled shaft with nut, lock & dress washer. (short shaft pot threaded bushing is 3/8" tall & 3/8" diameter).
      • 500K Ohms/5% Tolerance
      • Audio Taper
      • Bakelite base plate
      • Solid brass c-clip reinforced shaft
      • Solid brass bushing
      • 3/8-32 US thread
      • 3/8" (short shaft) bushing height
      • Split, fine 24-tooth, knurled, 1/4" diameter shaft
      • Chamfered shaft for easier knob installation and removal
      • Each pot comes with hardware - nut, dress washer and lock washer
      • Requires 3/8" diameter mounting hole
      Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500K TAOT.  
    • Two (2) Orange Drop .022uf@400v Polypropelene Capacitors
    • One (1) Switchcraft long straight toggle switch. Cream colored switch tip included. 
    • One (1) Deep Nut for Switchcraft switch. Please see note #3 below regarding nut for switch
    • One (1) Switchcraft #11, 1/4" Mono Jack
    • Five feet vintage-style braided shielded single conductor wire (for wiring switch & jack)
    • Approximately 14" of vintage-style 7-strand, pre-tinned, 22 awg black cloth push back wire (for grounding pots)
    • Approximately 14" 20 awg buss wire (for grounding switch, can also be used to ground pots)

    A great kit for the money.

    Please read the following before you order:
    1. As a general rule pre-1977 production Les Paul's, many of the historic reissue Les Paul's, ES series, PRS and Hamer guitars use short shaft pots. If you are uncertain whether your guitar uses short (3/8") or long
    (3/4") shaft  pots, please double check before you order. 
    2. All parts in this kit use American not metric sizing.  If you own an imported guitar (e.g. Japan, China, Mexico, etc.) the pots, switch and jack in this kit will not fit your guitar without enlarging the openings to 3/8" diameter.
    3. The switchcraft toggle switch comes standard with a flat nut, depending on the thickness of the body of the guitar (this includes most Les Pauls), you made need to use the "vintage-style" deep nut.
    4.
    Returns are only accepted on this item if all parts are unused.

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

×
×