TAOT Les Paul Long Shaft Wiring Kit - 525K CTS pots, K40Y-9 .022uf@400v caps

The Art Of Tone

Wiring Kit - Gibson Les Paul® - 525 Long Shaft - CTS 525KXL Pots - Russian K40Y-9 Caps


Sorry but this item is currently unavailable.

Please check back at a later stage.

9.00 Ounces
Usually ships within 24 hours
Calculated at checkout
  • Product Description

    This wiring kit gives you all the compenents you need to improve the tone of your favorite Les Paul in a moderately priced kit that includes our own custom spec. CTS TAOT 525K pots.

    What's included: 

    • Four (4) TAOT CTS 450S Custom Series 525KXL Audio Pots, long/split, knurled shaft with nut, lock & dress washer. (long shaft pot threaded bushing is 3/4" tall & 3/8" diameter).
      • 525K Ohms/10% Tolerance
      • Audio Taper
      • Bakelite base plate
      • Solid brass c-clip reinforced shaft
      • Solid brass bushing
      • 3/8-32 US thread
      • 34" (long shaft) bushing height
      • Split, fine 24-tooth, knurled, 1/4" diameter shaft
      • Chamfered shaft for easier knob installation and removal
      • Each pot comes with hardware - nut, dress washer and lock washer
      • Requires 3/8" diameter mounting hole
      Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S525K TAOT.  
    • Two (2) New Old Stock .022uf@400v Russian K40Y-9 Paper In Oil Capacitors
    • One (1) Switchcraft long straight toggle switch. Cream colored switch tip included. 
    • One (1) Deep Nut for Switchcraft switch. Please see note #3 below regarding nut for switch
    • One (1) Switchcraft #11, 1/4" Mono Jack
    • Five feet vintage-style braided shielded single conductor wire (for wiring switch & jack)
    • Approximately 14" of vintage-style 7-strand, pre-tinned, 22 awg black cloth push back wire (for grounding pots)
    • Approximately 14" 20 awg buss wire (for grounding switch, can also be used to ground pots)

    A great kit for the money.

    Please read the following before you order:
    1. As a general rule post-1977 production Les Paul's (with a control plate), excluding historic reissue Les Paul's, use long shaft pots. If you are uncertain whether your guitar uses short (3/8") or long
    (3/4") shaft  pots, please double check before you order. 
    2. All parts in this kit use American not metric sizing.  If you own an imported guitar (e.g. Japan, China, Mexico, etc.) the pots, switch and jack in this kit will not fit your guitar without enlarging the openings to 3/8" diameter.
    3. The switchcraft toggle switch comes standard with a flat and a deep nut, depending on the thickness of the body of the guitar (this includes most Les Pauls), you may need to use the deep nut.
    Returns are only accepted on this item if all parts are unused.

  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category